home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Gold Collection
/
Software Vault - The Gold Collection (American Databankers) (1993).ISO
/
cdr28
/
tbp150.zip
/
TBP165.TXT
< prev
next >
Wrap
Text File
|
1993-03-01
|
1KB
|
34 lines
Tech Bulletin: Hayes 2400 Baud Modems
NOVELL TECHNICAL BULLETIN
TITLE: Hayes 2400 Baud Modems
DOCUMENT ID: TB.P.165
DATE: 12/23/86
PRODUCT: NA
PRODUCT VERSION: NA
SUPERSEDES: NA
SYMPTOM: NA
ISSUE/PROBLEM
It has been found that some Hayes 2400 baud modems are not configured
correctly to work with NetWare V2.0 and above ASYNC Bridges. The same
Bridge, however, will work with a Hayes 1200 baud modem. The error
displayed on the screen by the 2400 baud modem response program reads
"The modem (if it exists) is not responding to initialization efforts."
On the 2400 baud modem, check to see if the firmware is set to the
factory settings. To do this, you should run the communication package
of your choice. While in terminal mode, type the following:
AT&F&W
The modem will then respond with an "OK." This will indicate that your
modem is now set to the factory settings. In most cases, resetting the
modem as done above corrects the problem.